SMC ZL3HN06-G Vacuum Generator Ejector Gauge GZ33-P1C-N01-X55

( Brand: Smc ), ( Manufacturer Part Number: ZL3HN06-G ), ( Part Type: Vacuum Generator Gauge ), ( Country Of Origin: Japan )

Review SMC Vacuum Generator Ejector Gauge

The **SMC ZL3HN06-G Vacuum Generator Ejector (GZ33-P1C-N01-X55 Gauge)** is a high-performance, precision-engineered pneumatic component designed to deliver reliable and efficient vacuum generation for a wide range of industrial applications. Part of SMC s renowned **ZL series**, this ejector combines robust construction with advanced fluid dynamics to produce a consistent and powerful vacuum source, making it ideal for processes requiring controlled suction, such as packaging, material handling, clamping, or pneumatic conveying systems. The **GZ33-P1C-N01** model features a compact yet durable design, constructed from high-quality materials to ensure longevity and resistance to wear, even under demanding operating conditions. The **X55 gauge** designation indicates a precise pressure rating, allowing for optimal performance across a broad range of vacuum requirements, typically ranging from mild suction needs to more demanding applications where a steady and clean vacuum is essential.

This vacuum generator ejector operates on the principle of **compressed air entrainment**, where high-pressure air is introduced into the device, creating a low-pressure zone that draws in ambient air or gas through an inlet port. The result is a strong, stable vacuum output that can be fine-tuned based on the specific application by adjusting the compressed air supply pressure. The **ZL3HN06-G** variant is particularly well-suited for environments where space efficiency is critical, as its compact footprint allows for easy integration into existing pneumatic systems without sacrificing performance. The ejector s internal design incorporates **optimized flow paths and minimal restriction points**, reducing energy consumption while maximizing vacuum efficiency an important consideration for facilities looking to enhance operational cost-effectiveness.

Safety and reliability are paramount in the design of this component, with features such as **sealed bearings and precision-machined components** ensuring smooth operation and minimizing the risk of leaks or failures. The **P1C** model variant is equipped with a **standardized connection interface**, making it compatible with a variety of SMC actuators, valves, and control systems, thereby simplifying installation and maintenance. Additionally, the ejector s **self-cleaning mechanism** helps prevent clogging from contaminants, which is particularly beneficial in industries where dust, debris, or moisture may be present in the air supply. The inclusion of a **vacuum gauge (X55)** provides real-time feedback, allowing operators to monitor performance and make adjustments as needed, ensuring consistent operation across different cycles.

Beyond its technical specifications, the **SMC ZL3HN06-G** vacuum generator ejector is engineered with **user-friendly features** that enhance its versatility. Its **quick-connect fittings** enable rapid installation and disconnection, reducing downtime during maintenance or system upgrades. The ejector s **low noise operation** and **vibration-dampening design** contribute to a quieter working environment, which is advantageous in applications where noise levels must be kept to a minimum. Whether integrated into a high-speed packaging line, a precision manufacturing setup, or a material handling system, this vacuum generator delivers **consistent, high-quality suction** with minimal operational hassle.

For industries prioritizing **energy efficiency and operational flexibility**, the **SMC ZL3HN06-G** stands out as a dependable solution. Its ability to generate vacuum without the need for external power sources relying solely on compressed air makes it a cost-effective alternative to electric vacuum pumps in many applications. With **SMC s reputation for innovation and durability**, this ejector is built to withstand continuous use in harsh industrial settings while maintaining peak performance. Whether used in food processing, automotive assembly, or general manufacturing, the **GZ33-P1C-N01-X55 gauge** vacuum generator ejector ensures that suction requirements are met with precision, efficiency, and reliability.

The **SMC ZL3HN06-G Vacuum Generator Ejector (GZ33-P1C-N01-X55 Gauge)** is a pneumatic component used to generate vacuum or assist in fluid transfer systems. Below is a detailed analysis of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **High Performance and Efficiency**

The SMC ZL3HN06-G is designed for reliable vacuum generation, making it suitable for applications requiring precise airflow control, such as packaging machines, material handling systems, or pneumatic conveying. Its efficient operation reduces energy consumption compared to less optimized alternatives.

2. **Compatibility with SMC s Pneumatic Systems**

As part of SMC s product line, this ejector integrates seamlessly with other SMC components (valves, regulators, filters, etc.), ensuring compatibility in existing pneumatic setups. This reduces the need for additional adapters or modifications.

3. **Durable Construction**

SMC components are generally built to withstand industrial environments, including exposure to dust, moisture, and temperature variations. The ejector s robust materials enhance longevity, reducing maintenance frequency.

4. **Adjustable and Modular Design**

The **GZ33-P1C-N01** model includes a gauge (X55) for monitoring vacuum levels, allowing operators to fine-tune performance. Some SMC ejectors also feature adjustable air consumption, enabling optimization for specific workloads.

5. **Quiet Operation**

Compared to some mechanical vacuum pumps, pneumatic ejectors like this one typically operate more quietly, which is beneficial in noise-sensitive environments.

6. **No Moving Parts (Beyond Pneumatic Actuation)**

Unlike rotary or reciprocating vacuum pumps, this ejector relies on compressed air to create suction, reducing wear from mechanical friction. This contributes to lower maintenance needs over time.

7. **Scalability**

SMC offers a range of ejectors with varying capacities, making it easy to scale performance up or down based on system requirements. This flexibility is useful for retrofitting or expanding existing systems.

8. **Quick Installation**

The modular design and standardized connections (e.g., M5, G , or other common ports) simplify installation, reducing downtime during setup or upgrades.

9. **Energy-Efficient for Intermittent Use**

For applications with periodic vacuum demands (e.g., packaging machines), the ejector can be activated only when needed, conserving compressed air compared to continuous-operation pumps.

10. **Global Availability and Support**

SMC is a well-established brand with widespread distribution and technical support, ensuring easier access to spare parts, documentation, and troubleshooting assistance.

---

### **Cons**

1. **Dependence on Compressed Air Quality**

The ejector s performance is directly tied to the quality of the input compressed air. Poor filtration, excessive moisture, or oil contamination can reduce efficiency, increase wear, or even damage the component. Additional filtration (e.g., SMC s FRL units) may be required, adding cost.

2. **Higher Initial Cost Compared to Mechanical Pumps**

While pneumatic ejectors are cost-effective in the long run for many applications, the upfront purchase price can be higher than that of a small electric vacuum pump or mechanical ejector. The total cost of ownership (TCO) must be evaluated over time.

3. **Limited Vacuum Strength for Heavy-Duty Applications**

The ZL3HN06-G is designed for moderate vacuum levels (typically up to 0.8 bar / 12 psi). For applications requiring very high vacuum (e.g., deep vacuum for sealing or lifting heavy loads), a multi-stage ejector or a different technology (e.g., rotary vane pump) may be necessary.

4. **Air Consumption Can Be Significant**

Generating vacuum via compressed air means the system must supply a continuous or high-volume flow of air. In facilities with limited compressed air capacity, this could lead to pressure drops or require upgrading the air compressor.

5. **Sensitivity to Backpressure**

If the exhaust or suction ports are restricted (e.g., by clogged filters or improper piping), the ejector s efficiency drops. Proper sizing of piping and regular maintenance are critical to optimal performance.

6. **Noise and Vibration in Some Setups**

While generally quieter than mechanical pumps, the ejector s operation can still generate some noise and vibration, particularly if installed without proper mounting or damping.

7. **Limited Lifespan Under Extreme Conditions**

In environments with extreme temperatures, corrosive gases, or frequent cycling, the ejector s lifespan may be shorter than expected. SMC s specifications should be checked to ensure compatibility with the operating conditions.

8. **Requires Proper Sizing for Optimal Performance**

Undersizing the ejector can lead to insufficient vacuum, while oversizing wastes compressed air. Accurate flow and pressure calculations are necessary for correct selection.

9. **Dependence on Compressed Air Supply**

If the facility s air compressor fails or the system experiences air pressure fluctuations, the ejector will cease functioning until the issue is resolved. This can cause downtime in critical applications.

10. **Training and Technical Knowledge Required**

Proper installation, commissioning, and troubleshooting of pneumatic systems often require specialized knowledge. Mistakes in setup (e.g., incorrect piping or gauge calibration) can lead to poor performance or damage.

---

### **Conclusion**

The **SMC ZL3HN06-G Vacuum Generator Ejector (GZ33-P1C-N01-X55 Gauge)** is a robust, efficient, and reliable choice for applications requiring moderate vacuum levels in pneumatic systems. Its integration with SMC s ecosystem, durability, and low-maintenance operation make it ideal for industrial settings where compressed air is already available. However, its performance is contingent on the quality of the input air and proper system design. For applications with high vacuum demands or extreme conditions, alternative technologies may be more suitable.

- Packaging machines (e.g., bag sealing, forming).

- Material handling (e.g., lifting or positioning lightweight components).

- Pneumatic conveying systems for dry bulk materials.

- Light-duty vacuum applications in manufacturing or automation.

For applications requiring deep vacuum, high throughput, or continuous operation under harsh conditions, a different solution (e.g., rotary vacuum pump or multi-stage ejector) should be considered.

---

### **Recommendation**

- Your application requires a moderate vacuum level (up to 0.8 bar) and you already have a reliable compressed air supply.

- You are using or plan to integrate other SMC pneumatic components, ensuring compatibility and simplified maintenance.

- Your system operates in a controlled environment with proper air filtration and pressure regulation.

- You prioritize low maintenance, quiet operation, and scalability for future adjustments.

- Your application demands very high vacuum levels or heavy-duty performance.

- Your facility lacks sufficient compressed air capacity or has inconsistent air quality.

- You are working in extremely harsh conditions (e.g., high temperatures, corrosive environments) where the ejector s lifespan may be compromised.

- Initial cost concerns are significant, and you can justify the investment based on long-term energy savings and reliability.

- Pair the ejector with an **SMC FRL unit** (Filter-Regulator-Lubricator) to ensure clean, dry, and properly pressured air input.

- Verify the **air consumption rate** for your specific application to avoid overloading your compressor.

- Consult SMC s technical documentation or a local distributor for assistance in sizing the ejector and piping for your system.

- Consider a **multi-stage ejector** or **rotary vacuum pump** if your requirements exceed the capabilities of the ZL3HN06-G.

Details:

Next day shipping services can also be provided upon request at actual calculated cost before purchase is completed. Does not come in original packaging. Please see photos for details. Kept as a surplus backup.

part #: zl3hn06 prices

• $174.95-$199.95

specifications valvplu:

• brand: Smc
• mpn: Zl3hn06-g
• part type: Vacuum Generator Gauge
• country of origin: Japan

offer valvplu:

• sold: 0
• options: Ship-to-home
• availability: In Stock
• started: April 8, 2026
• best offers: True
• quantity: 2

general valvplu:

• condition: Used
• Pumps Pump Accessories > Vacuum Pumps > Other Vacuum Pumps

returns valvplu:

• policy: Returns Accepted
• method: Money back
• paid by: Buyer
• time: 30 Days

seller valvplu:

• # reviews: 4180
• city: Grandview, Missouri
• rating: 100.0%

shipping valvplu:

• transit: 2-5 Days
• service: UPS Ground, UPS 2nd Day Air
• type: Calculated
• carrier: UPS
• cost: $0.00
• class: Standard, Expedited

payments valvplu:

• other
• credit card: Diners-club
• wallet: Paypal

Smc ZL3HN06 Is Similar To:

• 1d80-004808-11 Smc High Vacuum Valve Damaged (34.5% similar) Smc high vacuum valve XLA-40-X1163 with some heavy damage to the sealing flanges. Other than this the unit looks to be in good condition. Consider it as a parts unit...(April 24th, 2018)
• 2l80-000070-v1 Smc High Vacuum Valve (29.4% similar) Has some cosmetic wear. Shipping: buyer to pay in the us. All equipment is sold-as-is. The unit is untested. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. Comes as ...(October 9th, 2017)
• 3d80-000326-v1 Xld-50-x638 Smc High Vacuum (22.2% similar) All equipment is sold-as-is. Reach out to us. No manuals,no standard power cords, even if it appears in the photo, accessories, software etc are included unless pictured and noted. Has some cosmetic wear. All statements regarding products and their configurations are made to the best of our ability ...(September 30th, 2017)
• 3d80-002106-v1 Xlaq-25-x924 Smc High Vacuum (22% similar) No manuals, standard power cords, even if it appears in the photo, accessories, software etc are not included unless pictured and noted. Reach out to us. Has some cosmetic wear. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer ...(November 19th, 2017)
• 3d80-002107-v1 Xlaq-40-x925 Smc High Vacuum (22% similar) No means to test. No manuals,no standard power cords, even if it appears in the photo, accessories, software etc are included unless pictured and noted. Reach out to us. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is ...(September 30th, 2017)
• Cx12-000005-v1-xla-50j-x1258 Smc High Vacuum Valve (25.9% similar) All equipment is sold-as-is. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. No manuals,no standard power cords, even if it appears in the photo, accessories, software ...(August 16th, 2017)
• Ezh10bs-06-f01 Smc Vacuum Ejector New (40.8% similar) 95 for USPS first class shipping in the continental USA. Vacuum ejector Smc EZH10BS-06-F01 new in package buyer to pay...(February 3rd, 2018)
• Nzx1131-j15l0z-f-m Smc Vacuum Module (27.5% similar) 00FLUKE trend b serialize T13172 1,000. Industrial supplies industrial equipment fiber optic slab equipment restaurant equipment industrial automation controls test equipment retail services semiconductor PCB equip. 001636539 a 05869ASSY T13139 1,000. Automotive medical truck parts networking ...(August 22nd, 2018)
• Xgt311-50336-1f Smc High Vacuum Gate (33.3% similar) No means to test. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. No manuals,no standard power cords, even if it appears in the photo, accessories, software etc are ...(July 1st, 2017)
• Xla-16-x555 Smc High Vacuum Angle Valve Mpa Press Pa Atm (26.2% similar) Smc high vacuum angle valve part number: XLA-16-X555 ope. Clean, and aside from a few scratches on the body that looks like they came mounting brackets, excellent. Condition: used, untested. C9-S4-B4 Re NM rel. You can't have the tape measure. 7 pa : 5 l total length : 103MM port size: 30 comes ...(March 19th, 2018)
• Xlav-25f-5lz Smc 4 High Vacuum (25% similar) 4 valves included in these two assembly. These units came from ge plant closing, it was in their spare parts inventory, untested, as is...(December 18th, 2017)