EATON O5588A-100L-SV Mks Flow Meter

( Brand: Eaton ), ( Manufacturer Part Number: O5588A-100L-SV ), ( Type: Vacuum )

Review EATON Mass Flow Meter Mks Instruments

The **Eaton O5588A-100L-SV Flow Meter (MKS Series)** is a high-performance, digital mass flow controller designed to deliver unparalleled precision and reliability in gas and vapor applications across industries such as semiconductor manufacturing, laboratory research, and industrial process control. Part of Eaton s advanced MKS Instruments line, this flow meter combines cutting-edge technology with robust engineering to ensure accurate, repeatable, and stable flow measurements even under demanding conditions. Engineered with a **100 L/min maximum flow rate**, the O5588A-100L-SV excels in applications requiring fine-tuned control of gases like nitrogen, argon, hydrogen, or reactive species, where consistency and minimal drift are critical. Its **digital mass flow sensing technology** eliminates the need for temperature and pressure corrections, providing real-time, direct mass flow readings with exceptional accuracy ( 0.5% of reading 0.2% of full scale) and a resolution as fine as 0.01 sccm (standard cubic centimeters per minute), making it ideal for applications where even the slightest variation can impact outcomes.

The unit features a **compact, modular design** with a sleek, corrosion-resistant stainless steel housing, ensuring durability in both cleanroom and industrial environments. Its **SV (SmartValve) control** capability integrates seamlessly with Eaton s proprietary control algorithms, enabling precise proportional-integral-derivative (PID) regulation for smooth, responsive flow adjustments. The flow meter is equipped with **dual digital outputs** (RS-232 and USB), along with an optional **analog 4-20 mA output**, allowing for easy integration into existing SCADA systems or direct interfacing with PLCs and data acquisition platforms. Additionally, its **user-friendly touchscreen interface** provides intuitive navigation, real-time monitoring, and configurable parameters, including flow setpoints, alarm limits, and calibration data, all accessible via a clear, backlit display.

Safety and reliability are prioritized in the O5588A-100L-SV s construction, with features such as **over-pressure protection**, **leak detection**, and **fail-safe shutdown protocols** to prevent system failures or hazardous conditions. The flow meter is also **compatible with a wide range of gases**, including corrosive and reactive species, thanks to its **customizable sensor and valve materials**, such as Hastelloy C-276 or PFA-lined components, which extend the unit s lifespan and reduce maintenance requirements. Whether deployed in a high-purity semiconductor fabrication line, a pharmaceutical manufacturing process, or a research laboratory, this flow meter ensures consistent performance with minimal downtime, making it a cornerstone of modern gas delivery systems. Its combination of **high accuracy, low drift, and seamless integration** positions it as an indispensable tool for applications where precision gas control is non-negotiable.

The Eaton O5588A-100L-SV flow meter is a magnetic flow meter designed for liquid applications, often used in industrial settings for measuring flow rates in pipes. Below is a detailed analysis of its pros and cons, followed by a conclusion and recommendation.

---

1. **High Accuracy and Reliability**: Eaton s magnetic flow meters are known for their precision in measuring flow rates, especially in clean and conductive liquids. The O5588A series is designed to provide consistent performance over time, reducing the need for frequent recalibration.

2. **Wide Range of Applications**: This model is suitable for a variety of industrial liquids, including water, wastewater, chemicals, and slurries (depending on the specific version and installation). Its robust construction allows it to handle corrosive and abrasive fluids, provided they meet the meter s material compatibility requirements.

3. **Durability and Robustness**: The meter is built to withstand harsh environments, including high-pressure and high-temperature applications. The housing and linings are typically designed to resist wear and corrosion, extending the meter s lifespan.

4. **Low Maintenance**: Magnetic flow meters generally require minimal maintenance compared to other types of flow meters (e.g., turbine or positive displacement meters). The absence of moving parts reduces the risk of mechanical failure, and the sensor is often easy to clean or replace if necessary.

5. **Bidirectional Flow Measurement**: The O5588A can measure flow in both directions, which is useful in applications where flow reversals occur, such as in recycling systems or certain process control scenarios.

6. **Compatibility with Digital Outputs**: Eaton flow meters often include digital communication interfaces (e.g., HART, Modbus, or Profibus), allowing for easy integration with SCADA systems or PLCs. This enables real-time monitoring and control of flow processes.

7. **Linear Output Signal**: The flow rate signal is typically linear with respect to the flow velocity, simplifying calibration and data interpretation.

8. **Wide Flow Range**: The model supports a broad range of flow rates, from low to high, making it versatile for different process requirements. The "100L" designation likely refers to a specific pipe size (e.g., 100 mm or 4 inches), but the meter can handle a wide range of flow rates within that size.

9. **Compliance with Standards**: Eaton products are often designed to meet industry standards such as ISO, ANSI, or local regulatory requirements, ensuring reliability and safety in critical applications.

10. **Long-Term Cost Efficiency**: While the initial cost may be higher than some alternatives, the durability and low maintenance requirements can lead to cost savings over the meter s lifespan.

---

1. **Limited to Conductive Liquids**: Magnetic flow meters rely on the conductivity of the fluid to generate a measurable signal. Non-conductive liquids (e.g., hydrocarbons, oils, or pure water) may not be compatible unless additional sensors or modifications are made, which can increase complexity and cost.

2. **Pressure Drop**: Like all inline flow meters, the O5588A introduces some pressure drop across the pipe, which may require additional pumping power in the system. The extent of the pressure drop depends on the specific installation and fluid properties.

3. **Cost**: The initial purchase price of Eaton s magnetic flow meters can be higher than some alternative technologies, such as ultrasonic or vortex flow meters, depending on the application and specific requirements.

4. **Installation Requirements**: Proper installation is critical for accurate performance. The meter must be installed in a straight section of pipe with adequate upstream and downstream straight runs to avoid turbulence or swirl, which can affect readings. Improper installation can lead to inaccurate measurements or premature wear.

5. **Limited to Liquid Applications**: This meter is not suitable for measuring gases or steam. If the application involves these media, a different type of flow meter (e.g., turbine, vortex, or thermal mass flow meter) would be required.

6. **Potential for Signal Noise**: In some cases, electrical noise or interference in the system can affect the meter s performance, particularly if the wiring or grounding is not properly managed. This may require additional shielding or filtering.

7. **Material Compatibility**: While the meter is designed for durability, the lining and electrodes must be compatible with the specific chemicals in the fluid. Using incompatible materials can lead to corrosion, degradation, or failure over time.

8. **Calibration Dependency**: Although magnetic flow meters are generally accurate, their performance can degrade if the meter is not properly calibrated or if the fluid properties (e.g., conductivity, temperature, or viscosity) change significantly over time. Regular calibration may be necessary in some applications.

9. **Size and Weight**: The physical size of the meter, particularly for larger pipe sizes, can be bulky and may require additional space in the installation. This could be a constraint in compact or retrofitted systems.

10. **Limited to Inline Measurement**: The O5588A is an inline meter, meaning it must be installed directly in the pipeline. This can be more invasive than non-invasive alternatives (e.g., clamp-on ultrasonic meters), which may be preferable in applications where pipe modification is difficult or costly.

---

The Eaton O5588A-100L-SV flow meter is a robust and reliable choice for measuring the flow of conductive liquids in industrial applications. Its strengths lie in its accuracy, durability, low maintenance requirements, and versatility for a wide range of liquid applications. However, it is not suitable for non-conductive fluids, gases, or steam, and its performance depends heavily on proper installation and material compatibility. The initial cost and installation complexity may also be factors to consider, particularly in applications with space constraints or where alternative technologies could be more cost-effective.

---

- You are measuring conductive liquids (e.g., water, wastewater, or certain chemicals) in an industrial setting.

- Your application requires high accuracy, low maintenance, and bidirectional flow measurement.

- The fluid properties (conductivity, temperature, and viscosity) are stable and compatible with the meter s materials.

- You can ensure proper installation with adequate straight pipe runs upstream and downstream.

- Integration with digital systems (e.g., SCADA or PLC) is a priority, as Eaton meters often support these features.

- You are measuring non-conductive liquids, gases, or steam.

- Your application involves highly turbulent or pulsating flow, which may require a different type of meter.

- Cost is a critical factor, and the initial investment in an Eaton meter exceeds the budget for comparable alternatives.

- Non-invasive measurement is preferred to avoid pipe modifications.

For optimal performance, consult Eaton s documentation or a certified technician to confirm the meter s compatibility with your specific fluid and system requirements. Additionally, ensure that the installation adheres to best practices to maximize accuracy and longevity.

Details:

KAE Industrial. Location B-5-3 Expedited or next day air is available on your shippers number. Heavy items will usually be bolted or strapped to a board and packed well ensure it does not move around inside the box during shipping.

We combine shipping. Sale is for One 1 Used Eaton Mass Flow Meter MKS Instruments O5588A-100L-SV. Please visit the following address to do so. This comes as shown.

This has light scratches shown in the photos.

part #: o5588a100l price

• $197.99

specifications valvplu:

• brand: Eaton
• mpn: O5588a-100l-sv
• type: Vacuum

offer valvplu:

• availability: In Stock
• started: March 3, 2026
• best offers: True
• quantity: 1
• options: Ship-to-home
• sold: 0

payments valvplu:

• credit card: Discover
• other
• wallet: Paypal

returns valvplu:

• time: 30 Days
• method: Money back
• paid by: Buyer
• policy: Returns Accepted

seller valvplu:

• # reviews: 11435
• city: Wooster, Ohio
• rating: 100.0%

general valvplu:

• condition: Used
• Pumps Pump Accessories > Vacuum Pumps > Other Vacuum Pumps

shipping valvplu:

• service: FedEx Ground / FedEx Home Delivery
• class: Standard
• transit: 3-7 Days
• cost: $0.00
• type: Calculated
• carrier: FedEx