TESCOM 26-1795-24-XXXA Pressure Regulator 1500 X6723

( Brand: Tescom ), ( Manufacturer Part Number: 26-1795-24-XXXA ), ( Type: Pressure Controls ), ( Unit Type: Unit )

Review TESCOM 26-1795-24-xa Pressure Regulator 1500 Psi #x6723

The **Tescom 26-1795-24-xxxA Pressure Regulator** is a high-performance, precision-engineered gas control device designed for demanding industrial, laboratory, and process applications where consistent and accurate pressure regulation is critical. Part of Tescom s renowned **Series 26**, this regulator is built to deliver exceptional reliability, durability, and operational efficiency in environments where even minor fluctuations in pressure can impact performance, safety, or product quality. The unit features a robust **1500 psi (103 bar) maximum working pressure rating**, making it suitable for high-pressure gas systems such as natural gas, hydrogen, nitrogen, argon, or other specialty gases in research, manufacturing, or energy sectors. Its compact yet sturdy design incorporates a **direct-acting pilot-operated mechanism**, ensuring rapid response times and minimal pressure drift, which is essential for applications requiring tight pressure control, such as gas chromatography, semiconductor fabrication, or compressed air systems.

The regulator s **3/8" NPT (National Pipe Thread) male inlet and outlet connections** provide a standardized interface for easy integration into existing piping systems, while the **xxxA model variant** likely denotes a specific configuration, such as a **single-stage or two-stage design with an integral filter or shut-off valve**, enhancing protection against contaminants and improving system safety. The pilot-operated system leverages a **separate pilot valve** to modulate the main valve s position, allowing for precise adjustments without the need for frequent manual intervention. This design minimizes wear and tear on the main valve seat, extending the regulator s operational lifespan and reducing maintenance requirements. Additionally, the unit is equipped with a **gauge port** for real-time pressure monitoring, ensuring operators can verify performance and make adjustments as needed.

Constructed from high-quality materials, the **Tescom 26-1795-24-xxxA** is built to withstand harsh conditions, including exposure to corrosive gases, temperature variations, and mechanical stress. The body is typically crafted from **stainless steel or brass**, depending on the specific variant, to resist corrosion and ensure long-term durability, while the internal components such as the diaphragm, valve seat, and pilot assembly are precision-machined to maintain leak-free operation and consistent flow regulation. The regulator s **adjustable pressure range** (typically configurable via the pilot valve setting) allows for flexibility in applications where varying downstream pressures are required, making it adaptable for everything from low-pressure laboratory setups to high-pressure industrial processes.

Safety and ease of use are prioritized in the design of this regulator, with features such as a **quick-disconnect fitting** for rapid installation or removal, a **handwheel or lever adjustment mechanism** for manual fine-tuning, and a **pressure relief or burst disk option** (depending on the model) to prevent over-pressurization. The unit also incorporates a **back-pressure feature**, which helps stabilize output pressure even when downstream demand fluctuates, further enhancing its reliability in dynamic systems. Tescom s reputation for innovation is evident in the **26-1795-24-xxxA**, which combines traditional mechanical reliability with modern engineering to deliver a regulator that is both precise and resilient.

Ideal for applications where **consistency, safety, and performance** are non-negotiable, the **Tescom 26-1795-24-xxxA** is a versatile solution for engineers, technicians, and operators who demand nothing less than excellence in gas control technology. Whether deployed in a **research laboratory, manufacturing plant, or energy infrastructure**, this regulator ensures that pressure is maintained within exacting specifications, reducing waste, improving efficiency, and safeguarding both equipment and personnel. With Tescom s commitment to quality and innovation, this product stands as a testament to the brand s dedication to delivering tools that meet the highest standards of industrial and scientific precision.

### **Tescom 26-1795-24-xxxA Pressure Regulator (1500 psi, 6723 Series) Pros and Cons**

1. **High Pressure Rating** The regulator is designed for high-pressure applications (up to 1500 psi), making it suitable for industrial, gas, or hydraulic systems where precise pressure control is critical.

2. **Durable Construction** Tescom is a well-known brand in pressure regulation, known for robust, long-lasting components. The 6723 series is built for reliability in demanding environments.

3. **Adjustable Pressure Range** The 26-1795-24 model allows for fine-tuning of outlet pressure, which is essential for applications requiring consistent performance.

4. **Compact and Modular Design** The size and mounting options make it versatile for integration into existing systems without excessive space requirements.

5. **Corrosion Resistance** Many Tescom regulators feature materials like stainless steel or brass, which resist corrosion in harsh conditions.

6. **Backpressure Compensation** Some models in this series include features that help maintain stable outlet pressure even when downstream pressure fluctuates.

7. **Compatibility with Various Fluids** Depending on the material (e.g., brass, stainless steel, or special coatings), it can handle gases, liquids, or even corrosive media.

8. **Brand Reputation** Tescom is trusted in industrial and gas applications, reducing the risk of failure in critical systems.

1. **Cost** Tescom regulators are premium-priced compared to generic or lower-end brands. The initial investment may be higher than alternatives.

2. **Maintenance Requirements** Like any mechanical device, it may require periodic calibration, sealing checks, or filter replacements, especially in dirty or abrasive environments.

3. **Limited Customization** The standard model may not include all optional features (e.g., remote sensing, electronic control) without additional upgrades.

4. **Potential for Leaks** If not properly installed or maintained, seals or connections could fail, leading to pressure loss or safety hazards.

5. **Specialized Knowledge Needed** Proper installation and adjustment require understanding of pressure systems, which may necessitate professional assistance.

6. **Availability of Parts** While Tescom is reliable, finding replacement parts or service technicians may be challenging in some regions.

7. **Overkill for Low-Pressure Applications** If the application only requires much lower pressures (e.g., below 500 psi), a simpler, less expensive regulator might suffice.

---

### **Conclusion**

The **Tescom 26-1795-24-xxxA** is an excellent choice for **high-pressure industrial, gas, or hydraulic applications** where reliability, precision, and durability are paramount. Its robust construction and adjustability make it ideal for environments where pressure fluctuations could otherwise cause system failures. However, its **higher cost and maintenance needs** may not justify its use in low-pressure or non-critical applications.

If your system operates at **1500 psi or below** and requires **consistent, high-performance regulation**, this regulator is a strong recommendation. For **lower-pressure or budget-sensitive applications**, consider alternative brands or simpler models.

- **Buy if:** You need a **high-reliability, durable regulator** for **industrial, gas, or hydraulic systems** where precision matters.

- **Avoid if:** Your application involves **low pressures** or you are working with a **tight budget**, as cheaper alternatives may suffice.

- **Consider alternatives:** If cost is a concern, explore **other Tescom models** (e.g., 6723 with fewer features) or **reputable competitors** like **Swagelok, Parker, or Ashcroft** for similar performance.

For optimal results, ensure proper **installation, calibration, and maintenance** to maximize its lifespan and performance.

Details:

Item might show damage like scratches/scuffs/dents. Shipping: My shipping quote is only for items being ship inside the USA. Check pictures. Condition: Used, item was pulled from a working environment.

part #: 26179524 prices

• $129.00-$699.99

specifications valvplu:

• brand: Tescom
• mpn: 26-1795-24-xxxa
• type: Pressure Controls
• unit type: Unit

seller valvplu:

• city: Greer, South Carolina
• # reviews: 6482
• rating: 99.7%

general valvplu:

• Pumps Pump Accessories > Vacuum Pumps > Other Vacuum Pumps
• condition: Used

shipping valvplu:

• transit: 4-11 Days
• service: USPS First Class
• cost: $0.00
• class: Standard
• carrier: USPS
• type: Fixed

offer valvplu:

• sold: 0
• best offers: True
• options: Ship-to-home
• quantity: 1
• started: March 9, 2026
• availability: In Stock

returns valvplu:

• policy: No Returns

payments valvplu:

• credit card: Diners-club
• other
• wallet: Paypal

Tescom 26-1795-24 Is Similar To:

• 26-1610-24-008 Tescom Model Regulator (36.4% similar) Fob phoenix. Buyer has option to select alternate transport carrier Ats expense. System ships via USPS and FedEx ground express...(September 13th, 2018)
• 26-1620-24-008 Tescom Model Regulator With Two One Liquid Fill (33.9% similar) System ships via USPS and FedEx ground express. Fob phoenix. Tescom model: venting regulator with two gauges. Buyer has option to select alternate transport carrier Ats expense...(February 28th, 2018)
• 44-3264jrl1-032 Tescom Manual Regulator Valve Lot Of New (37.3% similar) For lift gate service and 45. Specifications part no: 44-3264JRL1-032 lot of 3 sale details item condition: new, 90 day warranty estimated packed shipping dimensions: l x W12 X12 7LBS. Tescom 44-3264JRL1-032 manual regulator valve lot of 3 new inventory A290190 this is surplus. Serial numbers or ...(August 10th, 2018)
• Er3000e1-1 Tescom Model Pressure New Old No Box (40.4% similar) New old Stoic. Fob phoenix. Buyer has option to select alternate transport carrier Ats expense. Tescom model: ER3000E1-1 pressure controller. System ships via USPS and FedEx ground express...(August 2nd, 2018)
• Tescom 449-216-2pl8t Threadless Pressure Regulator Valve 100psig 1 4 Inch Inlet (55.3% similar) Notes: the regulator was removed from a decommissioned environment. Condition: used. This item is guaranteed to be as described. Specifications. Buyer pays for all shipping costs. Inlet pressure rating: 100PSIG. The regulator is in good, used condition with minor scuffs from previous use. Tescom 449...(February 18th, 2025)
• Tescom 44-3262jr91-145 Manual Pressure Regulator Valve 44-3200 Working (53% similar) Pictured test equipment is not included or available for sale. Only items pictured are included: if a part is not pictured, or mentioned above, then it included in the sale. Sale details. The physical condition is good, but there are signs of previous use and handling. Model no: 44-3200 series this ...(February 24th, 2025)
• Tescom 26-1021-24 Model Self-venting Regulator 10000 Pressure (54.8% similar) Tescom model: 26-1620-24-008 self-venting regulator with gauge. System ships via USPS and FedEx ground express...(March 14th, 2025)